Crosshead Guide

Crosshead Guide

Crosshead guide Crosshead guide is used to Guiding the crosshead, used for a long time which can cause the thickness of the guide plate to drop, and the middle pull rod produces the elevation Angle. The piston causes the eccentric wear which should be repaired and adjusted in time.(Item 17) The...

Send InquiryChat Now
Product Details

Crosshead guide

Crosshead guide is used to Guiding the crosshead, used for a long time which can cause the thickness of the guide plate to drop, and the middle pull rod produces the elevation Angle. The piston causes the eccentric wear which should be repaired and adjusted in time.(Item 17)

Crosshead guide.jpg

The guide surfaces are either machined into the A frames or are separately cast and machined, then bolted to the A frames. The alignment of the guides is very important as is the clearance between the guides and slippers. If this alignment is out of true or the clearances excessive then excessive wear will occur between piston rod and stuffing box and piston and cylinder liner.


Hot Tags: crosshead guide, China, suppliers, manufacturers, service, for sale
Related Products
Inquiry

Copyright © Shaanxi Rongle Petroleum Machinery Co.,Ltd All Rights Reserved.